Silicone Mold Vacuum Casting

Vacuum casting is used for materials that cannot be cut from or carved out of an original block of material. After making an initial pattern, a silicone based mold is made based on the pattern. This allows the desired material to be casted (poured into pattern cavity and hardened). This method allows for the prototyping of clear plastics and rubber parts. Normally, a vacuum casted mold is good for approximately 10-15 pieces, Vacuum castings produce prototypes that are precise replicas of the mold that are also dimensionally and texturally accurate, Vacuum Casting and silicone molds are perfect for short run production. 

Nasz kauczuku silikonowego zdolność odlewania próżniowego

Vacuum casting equipment: 3 sets
Silicone mold vacuum casting Maximum size is 1000mm×800mm×800mm
The tolerance can be controlled to 100mm/±0.20mm
Preferred model Formats: x-t, .stp, .igs, .stl, Auto CAD, Pro/E, Unigraphics
Lead time: 5~15 days, according to the actual prototyping requirement
Silicone mold life: 10 time , but 3~8 times is more better .
Thickness of duplication part :≦2.5mm .
Vacuum casting cycle time: 50min ~90 min
Materials available: ABS, PP, PC, PP, Rubber, Transparent part.

Obróbka powierzchni
Polski, przezroczysta powierzchnia, przezroczyste powierzchni, malowanie, olej gumy, Sitodruk

Jeśli zainteresowanie naszymi usługami i być dostosowane do Twojego projektu, napisz do nas: info@youde-prototype.com,

Click here, spróbować teraz  , prosimy o przesłanie rysunku cytat zostanie przedstawiony w ciągu 24h.

Silicone-image

Wyślij wiadomość do nas:

Zapytanie teraz
  • * CAPTCHA: Proszę wybrać Cup


Zapytanie teraz
  • * CAPTCHA: Proszę wybrać Truck

WhatsApp Online Chat !