Silicone Casting Mold ດູດຝຸ່ນ

Vacuum casting is used for materials that cannot be cut from or carved out of an original block of material. After making an initial pattern, a silicone based mold is made based on the pattern. This allows the desired material to be casted (poured into pattern cavity and hardened). This method allows for the prototyping of clear plastics and rubber parts. Normally, a vacuum casted mold is good for approximately 10-15 pieces, Vacuum castings produce prototypes that are precise replicas of the mold that are also dimensionally and texturally accurate, Vacuum Casting and silicone molds are perfect for short run production. 

mold, Silicon ຄວາມອາດສາມາດດູດຝຸ່ນຊີ້ຂາດຂອງພວກເຮົາ

Vacuum casting equipment: 3 sets
Silicone mold vacuum casting Maximum size is 1000mm×800mm×800mm
The tolerance can be controlled to 100mm/±0.20mm
Preferred model Formats: x-t, .stp, .igs, .stl, Auto CAD, Pro/E, Unigraphics
Lead time: 5~15 days, according to the actual prototyping requirement
Silicone mold life: 10 time , but 3~8 times is more better .
Thickness of duplication part :≦2.5mm .
Vacuum casting cycle time: 50min ~90 min
Materials available: ABS, PP, PC, PP, Rubber, Transparent part.

ການປິ່ນປົວດ້ານ,
ໂປໂລຍ, ດ້ານໂປ່ງໃສ, ດ້ານໂປ່ງແສງສີ, ນ້ໍາຢາງ, ການພິມ Silk ຫນ້າຈໍ

ຖ້າຫາກວ່າທ່ານມີຄວາມສົນໃຈບໍລິການຂອງພວກເຮົາແລະໄດ້ຮັບການເຫມາະສົມສໍາລັບໂຄງການຂອງທ່ານ, ກະລຸນາອີເມຂອງພວກເຮົາ: info@youde-prototype.com,

Click here, ພະຍາຍາມໃນປັດຈຸບັນ  , ກະລຸນາສົ່ງຮູບແຕ້ມ, ປະກາດຈະຖືກສົ່ງພາຍໃນ 24.

Silicone-image

ສົ່ງຂໍ້ຄວາມຂອງທ່ານກັບພວກເຮົາ:

ສອບຖາມຂໍ້ມູນໃນປັດຈຸບັນ
  • * CAPTCHA: ກະລຸນາເລືອກເອົາ ເຕະບານ


ສອບຖາມຂໍ້ມູນໃນປັດຈຸບັນ
  • * CAPTCHA: ກະລຸນາເລືອກເອົາ ຫົວໃຈ

WhatsApp Online Chat !